some issues with 14.1

[Daniel Braniss]

hi,
these are some issues I’m having with 14.1.
1- I use SOL to view the console via ipmi - not the serial but the serial-over-lan.
up to13.2 all is ok, by all i mean:
1 - boot/kernel/init output is visible
2 - escape to debugger via \n~^B works.
3 - /dev/console is fine
with 14.1:
1- init output is missing (have to guess why multiuser fails :-)
2- no longer works
3- is not working (hence explaining 1)
any insights?
thanks,
danny



--
Posted automagically by a mail2news gateway at muc.de e.V.
Please direct questions, flames, donations, etc. to news-***@muc.de

[Warner Losh]

hi,
these are some issues I’m having with 14.1.
1- I use SOL to view the console via ipmi - not the serial but the serial-over-lan.
1 - boot/kernel/init output is visible
2 - escape to debugger via \n~^B works.
3 - /dev/console is fine
1- init output is missing (have to guess why multiuser fails :-)
2- no longer works
3- is not working (hence explaining 1)
any insights?

This is likely due to using UEFI. How did you configure this before with
BIOS?

Warner

[Daniel Braniss]

hi,
these are some issues I’m having with 14.1.
1- I use SOL to view the console via ipmi - not the serial but the serial-over-lan.
1 - boot/kernel/init output is visible
2 - escape to debugger via \n~^B works.
3 - /dev/console is fine
1- init output is missing (have to guess why multiuser fails :-)
2- no longer works
3- is not working (hence explaining 1)
any insights?
This is likely due to using UEFI. How did you configure this before with BIOS?

it’s happening also with vmware and bhive so I don’t think the BIOS is involved.
managed to solve - magically- the kernel/init outputs,
but now i’m still left with a non working escape to debugger,
will have to check the changes in the kernel

thanks,
danny

Warner